home *** CD-ROM | disk | FTP | other *** search
- Path: news.epix.net!PROBLEM_WITH_NODE_NAME!not-for-mail
- From: wnear@epix.net (Bill Near)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: GVP 68030/50 Jumper setting Help
- Date: 29 Feb 1996 00:52:35 GMT
- Organization: epix.net
- Message-ID: <4h2tcj$bpu@guava.epix.net>
- References: <4h1l60$5f3@uni2f.unige.ch>
- NNTP-Posting-Host: wsfdppp93.epix.net
- X-Newsreader: TIN [AMIGA 1.3 950726BETA PL0]
-
- On Wed, 28 Feb 1996 13:26:21 GMT, Stephane PEROLINI articulated:
- <> I have a GVP 68030/50Mhz in a A2000 but no docs (because I bought it
- <> in second hand) and I would like some info about Jumper setting for
- <> the memory:
- <> First: Is it possible to put 1Mb simm on it or only 4Mb Simm?
- <> Second: What are the jumper setting for all ram config ?
- <> (like 1 or 2 or 3 simm of 1 or 4 Mb )
-
- Here are the important jumpers:
-
- Jumper OPEN CLOSED
- J14 SCSI Drive Connected SCSI Drive Disconnected
- J12 Banks 1 & 2 as Extended Mem. Banks 1 & 2 as
- Autocong Mem.
-
- AFAIK, there were only 4 Mb SIMMs made for the G-Force '030
- @ 50. These are proprietary SIMMs, so you have to buy the
- ones made specifically for the GVP accelerators. A 4 Mb SIMM
- runs about $200 in the USA.
-
- --
- ---------------------------------------------------
- Bill ////\ wnear@epix.net
- Near ////\\\ A2000/030@50/Picasso II/Supra V.34
- //// \\\\ _____ __ _
- \\\\ ////___\\\\ //// |\ /| | / \ / \
- \\\\///-----\\\\/// | \/ | | | __ /---\
- \\\\/ \\\\/ | | __|__ \__/ / \
- Contributing Editor @ Amiga Report Magazine
- ---------------------------------------------------
-